[dcs_one_half] [dcs_bigbtn float=”left”margin=”0px 0px 0px 10px” url=”https://funguyinspections.com/free-mold-facts/contact-us/”]Contact Us[/dcs_bigbtn] [/dcs_one_half] [dcs_one_half_last]

[dcs_bigbtn float=”right”margin=”0px 0px 0px 10px” url=”url_path_goes_here” ]Schedule Now[/dcs_bigbtn] [/dcs_one_half_last] [dcs_clearboth h=”20″] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”A Picture a room in an older home located in Beverly Hills. Behind the kids furniture, the mold inspection found mold on the interior walls. Limited air flow and a lack of insulation created extreme mold conditions.” lightbox=”true” title=”Insulation Mold”url=”another image full url” pid=”60″] [/dcs_one_third] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”You see it every day, over splash around a bathroom shower is very common. Sinks, showers, toilets and bath tubs are a source of water. Swab samples were used by the mold inspector to collect mold spores from the surface of the drywall during the mold inspection.” lightbox=”true” title=”Shower Mold” url=”another image full url” pid=”61″] [/dcs_one_third] [dcs_one_third_last] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Water is the likely to flow down into adjacent the condo units below after a fire. Extreme saturation of the building materials indicated the potential for mold growth during the mold inspection. Mold Remediation followed after the Primary Mold Inspection was completed.” lightbox=”true” title=”Water damage After a Fire ” url=”another image full url” pid=”62″] [/dcs_one_third_last] [dcs_clearboth h=”20″] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Room additions add value to a property. This mold inspection revealed improper construction resulting in a construction defect, allowing moisture to penetrate the building envelope and mold to grow indoors.” lightbox=”true” title=”Room addition Mold”url=”another image full url” pid=”63″] [/dcs_one_third] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Bathroom tubs and showers are a red flag that can lead directly to amplified areas of fungal growth. Access panels located behind a tub should be inspected by your mold inspection company” lightbox=”true” title=”Bathroom Mold” url=”another image full url” pid=”64″] [/dcs_one_third] [dcs_one_third_last] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Samples for fungi can be taken in almost any location or your property during a mold inspection. Roof leaks can often result in a moldy ceiling if not tended to immediately. A full inspection of the building should occur.” lightbox=”true” title=”Ceiling Mold” url=”another image full url” pid=”65″] [/dcs_one_third_last] [dcs_clearboth h=”20″] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Exterior indicators can point inspectors in the correct location during a mold inspection. Excess moisture was found behind this wall. A tub was converted into a shower to a height of 5′. Mold growth was confirmed on the building interior.” lightbox=”true” title=”Remodeled Bathroom Mold”url=”another image full url” pid=”66″] [/dcs_one_third] [dcs_one_third] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Interior drain lines and water supply lines can cause fungal growth reservoirs within your home. Mold Inspection ” lightbox=”true” title=”Faulty Plumbing Mold” url=”another image full url” pid=”67″] [/dcs_one_third] [dcs_one_third_last] [dcs_img_ngg width=”250″ height=”250″ thumb=”true” framed=”black”
author=”author: Fun Guy” desc=”Mold growth comes in many shapes and sizes. This small discoloration on the wall, observed during a mold inspection, resulted in Penicillium and Aspergillus mold spore types.
Mold growth conditions were favored by excessive moisture.” lightbox=”true” title=”Brown Mold” url=”another image full url” pid=”68″] [/dcs_one_third_last]

[dcs_clearboth h=”20″]

[dcs_ngg_single margin="0px" 
list="60,61,62,63,64,65,66,67,68,"
width="100" height="100" group="ex4"]